Peerless WL-SR560M-200 Installation Guide

ISSUED: 08-24-12 SHEET #: 180-9037-2 10-30-122300 White Oak Circle • Aurora, Il 60502 • (800) 865-2112 • Fax: (800) 359-6500 • www.peerles

10 of 19ISSUED: 08-24-12 SHEET #: 180-9037-2 10-30-12Insert two 1/4-20 x 12 mm screws (I) into screen mount bracket (A), leaving 3/16" of exp

11 of 14ISSUED: 11-14-11 SHEET #: 180-9007-1NOTE: For mounting patterns smaller than VESA 400, use large enclosure mounting bracket (DD).Loosely at

12 of 19ISSUED: 08-24-12 SHEET #: 180-9037-2 10-30-12NOTE: "X" dimensions should be equal.NOTE: "Y" dimensions should be equal

13 of 19ISSUED: 08-24-12 SHEET #: 180-9037-2 10-30-12Begin with longer length screw, hand thread through multi-washer, adapter bracket and spacer

14 of 19ISSUED: 08-24-12 SHEET #: 180-9037-2 10-30-12Attach Universal Plate (E) to hook plate (B) using four M10 x 15 mm socket screws (JJ). Tight

15 of 19ISSUED: 08-24-12 SHEET #: 180-9037-2 10-30-12Untie the wireless receiver power adapter cord and route as shown below. Plug the end of the

16 of 19ISSUED: 08-24-12 SHEET #: 180-9037-2 10-30-12Locate the IR receiver inside of the wireless receiver enclosure shown in fi gure 19.1. Remove

17 of 19ISSUED: 08-24-12 SHEET #: 180-9037-2 10-30-12Close the top cover of the power module assembly (BB), making sure that the power adapter cor

18 of 19ISSUED: 08-24-12 SHEET #: 180-9037-2 10-30-12Cord ManagementRun extension cord (not included) through upright (G) using cord management ho

19 of 19ISSUED: 08-24-12 SHEET #: 180-9037-2 10-30-12© 2012 Peerless Industries, Inc. Peerless Industries, Inc. (“Peerless-AV®”) warrants to origi

2 of 19ISSUED: 08-24-12 SHEET #: 180-9037-2 10-30-12NOTE: Read entire instruction sheet before you start installation and assembly. Table of Conte

3 of 19ISSUED: 08-24-12 SHEET #: 180-9037-2 10-30-12Before you begin, make sure all parts shown are included with your product.Parts may appear sl

4 of 19ISSUED: 08-24-12 SHEET #: 180-9037-2 10-30-12ZRSNGDCVUTPHXMWLJJIJOQParts List continuedSome parts may appear slightly different than illust

5 of 19ISSUED: 08-24-12 SHEET #: 180-9037-2 10-30-12M5 x 25 mm (4)520-1122M4 x 12 mm (6)510-1079M4 x 25 mm (4)510-1082M5 x 12 mm (4)520-1064M6 x 1

6 of 19ISSUED: 08-24-12 SHEET #: 180-9037-2 10-30-12Insert right leg (S) into base housing (D) as shown in fi g. 1.1. Then align holes in right le

7 of 19ISSUED: 08-24-12 SHEET #: 180-9037-2 10-30-12LDGXfi g. 3.2CORD MANAGEMENT HOLESfi g. 3.1Attach upright (G) to base (D), as shown in fi g 3.1 u

8 of 19ISSUED: 08-24-12 SHEET #: 180-9037-2 10-30-12Slide shelf support (C) onto upright (G) so that 1/4-20 nuts (J) slide into slots of upright (

9 of 19ISSUED: 08-24-12 SHEET #: 180-9037-2 10-30-12Attaching Metal Shelf Attach shelf pan (P) to shelf support (C) using six 8/32 nylock nuts (O)